Table of Contents
Advertisement
When "Advanced",
"Signal", or "Informa-
tion" is selected for the
sub menu, you cannot
select any item in the
main menu.
If no button operation
is made for 30 seconds,
the OSD will be closed
automatically.
On Screen Display
The Projector has a multilingual On Screen Display (OSD)
that allows you to make image adjustments and change a
variety of settings. The projector will automatically detect the
source.
How to operate
1.
To open the OSD, press the MENU button on the Remote Control.
2.
When OSD is displayed, use the
in the main menu. While making a selection on a particular page,
press the
button to enter sub menu.
3.
Use the
buttons to select the desired item in the sub menu
and adjust the settings by using the
4.
If the setting has
enter another sub menu. Press the MENU button to close the sub
menu after adjustment.
5.
After adjusting the settings, press the MENU button to go back to
the main menu.
6. To exit, press the MENU button again. The OSD will be closed and
the projector will automatically save the new settings.
User Controls
icon, you could press the ENTER button to
Main Menu
Sub Menu
buttons to select any item
or
button.
Setting
19
... English
Advertisement
Table of Contents
Troubleshooting
