NEC U300X User Manual page 7

About High Altitude mode
• Set [Fan Mode] to [High] when using the projector at altitudes approximately 2500 feet/760 meters or
higher.
• Using the projector at altitudes approximately 2500 feet/760 meters or higher without setting to [High]
can cause the projector to overheat and the protector could shut down. If this happens, wait a couple
minutes and turn on the projector.
• Using the projector at altitudes less than approximately 2500 feet/760 meters and setting to [High] can
cause the lamp to overcool, causing the image to flicker. Switch [Fan Mode] to [Auto].
• Using the projector at altitudes approximately 2500 feet/760 meters or higher can shorten the life of opti-
cal com ponents such as the lamp.
About Copyright of original projected pictures:
Please note that using this projector for the purpose of commercial gain or the attraction of public attention
in a venue such as a coffee shop or hotel and employing compression or expansion of the screen image with
the following func tions may raise concern about the infringement of copyrights which are protected by copy-
right law. [Aspect Ratio], [Keystone], Magnifying feature and other similar features.
English ... v
Important Information