NEC U300X User Manual page 27

Introduction
 When the projec-
tor is in the standby
condition, the Error
Alert function of PC
Control Utility Pro4 is
not available.
To make this function
available even in the
standby condition, use
the E-Mail Alert func-
tion of the projector.
(-> page 46)
English ... 20
Controlling the Projector over a LAN (PC Control
Utility Pro 4)
Using the utility software "PC Control Utility Pro 4" that you
can download from our web site
(http://www.nec-display.com/dl/en/index.html), the projector
can be controlled from a computer over a LAN.
Control Functions
Power On/Off, signal selection, picture freeze, picture mute,
audio mute, adjusting, error message notification, event sched-
ule.
Screen of PC Control Utility Pro 4
This section provides an outline of preparation for use of PC Control
Utility Pro 4. For information on how to use PC Control Utility Pro 4,
see Help of PC Control Utility Pro 4. (-> page 22)
• Step 1: Install PC Control Utility Pro 4 on the computer. (-> page 21)
• Step 2: Connect the projector to a LAN. (-> page 22)
• Step 3: Start PC Control Utility Pro 4. (-> page 22)
TIP:
• PC Control Utility Pro 4 can be used with a serial connection.
• For update information on PC Control Utility Pro 4, visit our website:
http://www.nec-display.com/dl/en/index.html