NEC U300X User Manual page 54

Step 2: Select apply and press the ENTER button on the remote control or the control
panel to submit function or press the MENU button on the remote control or
the control panel to exit.
Step 3: To open Network Connections, click Start, click Control Panel, click Network
and Internet Connections, and then click Network Connections. Click the
connection you want to configure, and then, under Network Tasks
Change settings of this connection.
Step 4: On the General tab, under This
connection uses the following
items, click Internet Protocol
(TCP/IP), and then click
"Properties."
Step 5: Click Use the following IP
address, and type in as below:
1) IP address: 192.168.6.XXX
2) Subnet mask: 255.255.0.0
3) Default gateway:192.168.6.254
Step 6: To open Internet Options, click
IE web browser, click Internet
Options, click the Connections tab
and click "LAN Settings..."
User Controls
Step 7: The Local Area Network (LAN)
Setting dialog box appears, In
the Proxy Server area, cancel the
Use a proxy server for your LAN
check box., then click "OK" button
twice.
Step 8: Open your IE and type in the IP
address of 192.168.6.74 in the URL
then press the ENTER button key.
Step 9: Open "Projector Status and
Control" to control your projector.
, click
47 ... English