Table of Contents
Advertisement
8.3
Add Bluetooth pellet
Two different types of devices can be integrated in a network in the Casambi app: Bluetooth
pellet and radio switch with NFC sensor.
In this section you add a BT pellet to a Casambi app.
To add a radio switch, see chapter "Add radio switch" on page 20.
Fig. 5:
Adding a device to the network
The Casambi app searches automatically for all active Bluetooth devices and shows the
number of devices found on the start page behind "Devices in proximity" [1].
To add a BT pellet, perform the following steps:
1. Open the page "Devices in proximity" [1].
–
The located Bluetooth devices are displayed.
–
The designation of the device is in field [2].
–
All coupling information of the device is at point [4]. The coupling status must be
"Uncoupled".
Product manual 2CKA001373B5323
Commissioning
│16
Advertisement
Table of Contents
