Table of Contents
Advertisement
2. Tap on "Set up new network" [2].
3. Select an evolution network [3].
–
The evolution network is the higher value network. The classic network is not
recommended.
4. Assign a name to the network [4].
5. Activate function "Display lamps in close proximity".
–
The BT pellet is recognized as lamp in the app.
6. Set enable [6].
–
The option "Not enabled" is not recommended.
Attention! Access to the network with setting "Not enabled" is possible only with the
smartphone with which the network was created. Access to the network is no longer
possible if the smartphone is damaged or has been lost. To uncouple all devices and
create a new network, a complicated process is required.
7. To enable the network for the administrator access, enter an e-mail address. This stores
and secures the network in the Casambi Cloud.
8. Assign a strong password under "Administrator password" or add a new password for a
user.
9. Tap on "Finished" [5].
–
The network is created and stored in the "My networks" function.
–
The main page of the new network is displayed.
The network has now been set up.
Notice
Lost user passwords can only be reassigned via an administrator access.
Recommendation
Install a backup clock in your network so that date and time are automatically
synchronized after a power failure.
Without a backup clock you need to use a smartphone or gateway for the
synchronization in order to receive the correct date and time from the Cloud.
Product manual 2CKA001373B5323
Commissioning
│15
Advertisement
Table of Contents
