Table of Contents
Advertisement
3.4
Target group / Qualifications of personnel
3.4.1
Operation
No special qualifications are needed to operate the device.
3.4.2
Installation, commissioning and maintenance
Installation, commissioning and maintenance of the device must only be carried out by trained
and properly qualified electrical installers.
The electrical installer must have read and understood the manual and follow the instructions
provided.
The electrical installer must adhere to the valid national regulations in his/her country governing
the installation, functional test, repair and maintenance of electrical products.
The electrical installer must be familiar with and correctly apply the "five safety rules" (DIN VDE
0105, EN 50110):
1. Disconnect
2. Secure against being re-connected
3. Ensure there is no voltage
4. Connect to earth and short-circuit
5. Cover or barricade adjacent live parts
3.5
Safety instructions
Danger - Electric voltage!
Electric voltage! Risk of death and fire due to electric voltage of 100 ... 240 V.
Dangerous currents flow through the body when coming into direct or indirect
contact with live components. This can result in electric shock, burns or even
death.
■
■
■
■
■
■
■
Caution! - Risk of damaging the device due to external factors!
Moisture and contamination can damage the device.
■
Product manual 2CKA001373B5323
Work on the 100 ... 240 V supply system may only be performed by
authorised and qualified electricians.
Disconnect the mains power supply before installation / disassembly.
Never use the device with damaged connecting cables.
Do not open covers firmly bolted to the housing of the device.
Use the device only in a technically faultless state.
Do not make changes to or perform repairs on the device, on its components
or its accessories.
Keep the device away from water and wet surroundings.
Protect the device against humidity, dirt and damage during transport,
storage and operation.
Safety
│7
Advertisement
Table of Contents
