8.5
Add radio switch
Adding of radio switches in a Casambi network is performed in two sections:
■
Change into the list of the integrated devices of the desired network.
–
Here there is an automatic search for updates for all integrated devices.
■
Read in the radio switch.
–
The integration into the desired network takes place automatically.
Fig. 7:
Change to the integrated devices and automatic update
Use the following steps to add a radio switch:
1. Tap on "My networks" [1] on the start page.
–
The list with the created networks opens.
2. Tap on the desired network [2].
–
During a change into the network there is an automatic search for updates for all
integrated devices. If an update is available, the function "Firmware update" [3] opens.
Perform this function or skip it.
–
The main page of the network is displayed.
3. Tap on "More" [4].
Product manual 2CKA001373B5323
Commissioning
│20