Table of Contents
Advertisement
–
If the coupling status is "Coupled", the device must first be uncoupled from the
network, see chapter 8.7 "Uncoupling Bluetooth pellet" on page 26. Devices that are
already coupled cannot be added to any other network.
2. Tip on the information field of the device [3].
3. In list faded in select the "Add to ..." function [5].
–
The page "Select network" opens.
4. Select the desired network [6].
–
The selected BT pellet is coupled automatically and added to the network.
–
The start page opens.
–
The number of the added devices is displayed behind "My networks" [7].
It can take several seconds until the new device is displayed.
Product manual 2CKA001373B5323
Commissioning
│17
Advertisement
Table of Contents
