Fig. 11:
Rocker functions: Allocation of devices
7. Tap on "Lamp" [1].
–
The page "Select lamp" for the allocation of devices is displayed.
8. Select the device that is to be controlled with the rocker [2].
–
After the tap, the selected device is displayed highlighted [3].
9. Tap on "Finished" [4].
–
The display changes back to the rocker switch functions.
–
The allocated device is listed [5].
10. Tap on "Finished" [6].
–
The display changes back to the device characteristics.
11. Change back to the list of the integrated devices via the navigation bar [7].
The NFC radio switch is read in and integrated.
Commissioning of the device is now complete.
Product manual 2CKA001373B5323
Commissioning
│24