Bi-Amping The Loudspeakers
Bi-amping is similar to bi-wiring, but uses an additional amplifier (K3 Power Amplifier)
to drive the low frequency terminals. One set of cables goes from the K3 Integrated
Amplifier to the high frequency terminals on the loudspeaker and the power amplifier
drives the low frequency terminals. Connect the cables as illustrated below.
Right RCA Cable
Left RCA Cable
Positive Loudspeaker
Cable
Negative Loudspeaker
Cable
10
NOTE: Remove
bi-wire links from
between the
loudspeaker
terminals
roksan.com