Single Wiring The Loudspeakers; Bi-Wiring The Loudspeakers - Roksan Audio K3 Set Up Manual And Product Manual

Single Wiring The Loudspeakers

When single wiring, connect the loudspeaker cables as illustrated below.
Positive Loudspeaker
Cable
Negative Loudspeaker
Cable

Bi-Wiring The Loudspeakers

Bi-wiring is achieved by using a single amplifier, but splitting the high and low
frequency loudspeaker cables at the amplifier. It uses the same principles as bi-amping,
but the two sets of cables that feed the high and low frequency terminals on the
loudspeaker connect to the single set of terminals on the amplifier. Connect the cables
as illustrated below.
Positive Loudspeaker
Cable
Negative Loudspeaker
Cable
NOTE: Keep bi-wire
links between the
loudspeaker
terminals
NOTE: Remove
bi-wire links from
between the
loudspeaker
terminals
K3 Integrated Amplifier 9