8. MAINTENANCE, SERVICE AND REPAIR
8.1 Maintenance
8.1.1 Cut the electric and pneumatic (if any) power connections of the machine.
8.1.2 Clean all surfaces of the machine from burs, chips and foreign substances. If the machine will not be used for a
long time, lubricate undyed parts with oil that prevents rusting.
8.1.3 When cleaning the machine, do not use materials that may damage the dye.
8.1.4 Control crimping blades against corrosion, distortion and fractions. If crimping blades are damaged, change
them.
8.1.5 Periodically control the level of oil inside oil-conditioner's oil reservoir and hydraulic system unit
39