YILMAZ KP 120 Manual page 38

7.4.4 When filling hydraulic oil inside the oil tank turn the main schalters to OFF position and remove the oil filling tap
as shown in Figure 10 by turning; tap the hydraulic oil. Inspect the oil level to control the oil inside the tank
(PICTURE 10)
7.4.5 When the hydraulic system unit's oil tank is completely empty it takes app. 30 liters of oil. The manufacturer of
hydraulic system recommends using TELLUS 37 as hydraulic oil.
NOTE : In order to control the oil level inspect the oıl level after filling ın to the tank. The oil level should
be between min. and max.
Electric
Motor
Y4-1
PICTURE 11
Manometer
Y4-0
Adjust Pressure
Screw
Oil Filling
Plug
Oil Level
Indicator
38