Maintenance, Service And Repair; Maintenance - YILMAZ KM 210 Manual

7.2.5 Release the clamps and take out the end milled profile.
The milling operation has always to be started from the starting position of the machine. Never
start this operation from the opposite side.
NOTE:The milling cutters have to be started freely, without touching the profile. They have to start to rotate
first before making the milling operation.
7.2.6 Release the Start button after the milling operation is finished. The milling cutters will come to a full stop
within approx. 10 sec. after releasing the Stop button.

8. MAINTENANCE, SERVICE AND REPAIR

8.1 Maintenance

8.1.1 Cut the electric and pneumatic (if any) power connections of the machine.
8.1.2 Clean all surfaces of the machine from burs, chips and foreign substances. If the machine will not be used for a
long time, lubricate undyed parts with oil that prevents rusting.
8.1.3 When cleaning the machine, do not use materials that may damage the dye.
8.1.4 Control cutting tools against corrosion, distortion and fractions. If cutting tools are damaged, change them..
8.1.5 Before using cutting tool, operate the machine out of gear and control whether it is inserted correctly, it is
without flexure and it is inserted appropriately. Do not use cutting tools that are damaged or lost its functionality.
8.1.6 If the cutting tool are blunted, change immediately with a new / sharpened cutting tool.
8.1.7 Sharpen with proper sharpening machines by taking the angular value of the cutting tool into consideration.
33