Table of Contents
Advertisement
1 sec.
Measuring the water hardness
Upon machine commissioning, you will need to set the water hardness value.
Take out the water hardness measuring strip from the machine box. Follow
the steps shown on the display during installation phase. In case you want to
change water hardness settings later, press the CLEAN/SET
select SETTINGS
, and once in the settings menu, scroll
HARDNESS.
clean/setting
1
Immerse the water hardness measuring strip in a glass of water for one
second. Remove the strip from the water and wait for one minute.
2
Check how many squares turn red.
3
Select the corresponding hardness value and confirm by pressing the
Number of small
red squares
INTENZA+ water filter
We recommend adding an INTENZA+ water filter, to limit limescale formation. This
will ensure a longer lifetime of your coffee machine and a better coffee aroma over
time.
Water represents an essential element for coffee brewing. Therefore, it is extremely
important that water be always filtered in a professional way.
The INTENZA+ water filter prevents the formation of mineral deposits while
improving the water quality.
Installing the INTENZA+ water filter
Immerse the INTENZA+ water filter in cold water and in vertical position, with filter
opening side upwards. Press both sides of the filter gently to let any air bubbles
out.
Value to be set
1
2
3
4
English
button, then
and select WATER
clean/setting
Water hardness
very soft water
soft water
hard water
very hard water
19
.
INTENZA+
A
A
B
C
Advertisement
Table of Contents
