SIDE BORDER COLOR
INPUT HDMI, DVD/HD, S-VIDEO, VIDEO1, VIDEO2 only
INPUT S-VIDEO, VIDEO1, VIDEO2 only
INPUT DVD/HD, HDMI, S-VIDEO, VIDEO1, VIDEO2 only
Adjusts the color of the side borders when a 4:3 image is displayed.
Press + button, the bar will become lighter.
Press - button, the bar will become darker.
Resets the all settings within the DISPLAY PROTECTION menu back to factory setting.
Sets input change speed.
NOTE: When "QUICK" is selected, picture may be distorted when signal input is changed.
This function should be chosen after all adjustment options have been made for the input.
Selects the kind of DVI-D equipment which is connected to the DVI input. Select "DVI-PC" when PC or other
computer equipment is connected. Select "DVI-HD" when DVD player, which has DVI-D output, is connected.
Selects the kind of equipment which is connected to the BNC input.
RGB: Analog input (R, G, B, H, V)
COMPONENT: Component (Cr/Pr, Cb/Pb, Y)
VIDEO: Composite video (VIDEO2)
RAW: Disable the expanded feature.
EXPAND: Expand image contrast and increase detail in the dark and bright areas.
Selects IP (Interlace to Progressive) converter function.
Enables the IP function, to convert interlace signal to progressive. Normally use this.
Disables the IP function.
NOTE: This mode is better suited for motion pictures, but it is in danger of image retention.
Selects color system depend on your video format of the input signal.
AUTO: Selects color system setting automatically base on input signal.
Changes the display area of the image.
Set to display area about 95%
Set to display area about 100%
Resets the all settings within the ADVANCED OPTION menu back to factory setting.
Selecting "YES" allows you to reset PICTURE, ADJUST, AUDIO, PIP, OSD, MULTI DISPLAY,
DISPLAY PROTECTION and ADVANCED OPTION will be back to factory settings (except LANGUAGE,
DATE AND TIME and BNC MODE).
Select "YES" and press "SET" button to restore the factory preset data.
Press "EXIT" button to cancel and return the previous menu.