V421-2 Installation Guide
42" LCD Display
Table Top Stand Dimensions
This document is intended to be used as a reference guide to supply useful information for a design or installation. It is not
intended to be a step-by step procedure for installation.
Any ceilings or walls must be strong enough to support the monitor and the installation must be in accordance with any local
building codes. All mounts should make secure contact to wood studs.
4:3 sources can be displayed on the 16:9 screen in either normal aspect ratio with bars on the left or right, or stretched horizontally
to fill the screen using the menus (see "Aspect Modes" in menus and user manual).
Distances are in inches, for millimeters multiply by 25.4.
Distances may vary ±5%.
Tilt Angle and Rotation
Below are the maximum angles that the monitor can be tilted in the landscape position only.
1920 x 1080
NEC Display Solutions of America, Inc.
Dimensions without stand: 40.3"(W) x 26.2"(H) x 5.2"(D)
Dimensions with stand:
Weight without stand:
Weight with stand:
40.3"(W) x 25.6"(H) x 13.0"(D)
Page 1 of 9