Snmp - ICP DAS USA iNS-308 User Manual

iNS-308 User Manual

4.4 SNMP

The SNMP Page contains SNMP Configuration & trap address setup.
Use "SNMP v2c Agent Configuration" to set SNMP basic parameters and Trap IP Address, check the
Enable SNMP item and click the Update Settings button to enable the function
Note. Modify the SNMP Enable status please reboot the iNS-308 to activate the Modification
iNS-308 provide PoE Power Enable & Link status trap function, then status Modify will sead
information to your Trap IP, more information, please refer to the iNS-300 SNMP manual
Copyright © 2022 ICP DAS CO., Ltd. All Rights Reserved. - 25 -