Getting Started; Connecting The Power And The Host Pc - ICP DAS USA iNS-308 User Manual

iNS-308 User Manual

3. Getting Started

This chapter provides a basic overview of how to configure and operate the iNS-300 series module.

3.1 Connecting the Power and the Host PC

Step 1: Connect both the iNS-300 series module and the Host PC to the same sub network.
Ensure that the network settings on the Host PC have been correctly configured and are functioning
normally. Ensure that the Windows firewall or any Anti-Virus firewall is properly configured to allow
incoming connections, or temporarily disable these functions, otherwise the "Search Servers"
function in the eSearch Utility described in
perform as expected. Contact the System Administrator for instructions of how to do this.
Step 2: Apply power (+24 ~ +57 V
Copyright © 2022 ICP DAS CO., Ltd. All Rights Reserved.
Section 3.3"Configuring the Network Settings"
) to the iNS-308.
DC
may not
- 12 -