Maintenance; Visual Checks; Device Cleaning - Trolex XD One User Manual

Hide thumbs Also See for XD One:

Table of Contents

15. MAINTENANCE

The maintenance of the XD One must only be carried out by competent personnel. All

maintenance and repair must be considered with reference to the local safety regulations and

authorities.

The XD One contains no user serviceable components and the limits of user maintenance are

outlined in the following information.

Periodic visual checks should be carried out to assess if there are any issues or faults arising

with the XD One device. Periodically, unsure devices are checked for the following:

1. Any external damage to the device. Plastic parts should not be cracked or broken which

could affect the IP rating of the product.

2. Any obstruction to the particulate inlet/outlet.

3. Any damage or wear to the main product membrane, LED icons and power/function switch.

4. Any damage to the USB data/charge port.

5. Any damage to USB cable that is periodically connected to the XD One device.

6. Any damage to mounting hardware, clips, or fixings.

7. Labels on the product are still in place and are not peeling or discolouring.

As part of the routine maintenance schedule and during use in high dust loaded environments,

it is recommended that the XD One sensor is cleaned from time to time following the steps

below:

1. Wipe down the XD One inlet surfaces with a damp cloth to remove any external dust and

debris.

2. Using canned compressed clean air, spray the device inlet for 10 to 15 seconds to clean the

dust path.

XD One_User manual_P5644.1601_Rev B

Table of Contents