Safety Procedures; Laser Safety Precautions - Trolex XD One User Manual

Hide thumbs Also See for XD One:

Table of Contents

5. SAFETY PROCEDURES

Always observe the safety precautions detailed in this user manual. Personnel installing, operating

or maintaining the equipment are responsible for their personal safety and correct handling of the

equipment in accordance with all safety instructions in this user manual and those specified in local

guidelines or regulations.

Installation in working environments can be challenging and correct set up is critical to the function

of the instrument; it is important that you carefully read the entire product user manual before using

and installing the XD One for the first time.

Refer to the Certification and Conformity section of this user manual and to the relevant

certificates for any installation parameters and special conditions of safe use. The installation or

use of the XD One must only be carried out by competent personnel. Observe the national safety

regulations issued, for example, by the employers' liability insurance association, social security

institutions, occupational safety and health authorities or other safety organisations.

The XD One is a personal safety device and it is the operator's responsibility to respond

accordingly to any warnings, alarms or alerts in accordance with site regulations and instructions.

Follow all warnings and instructions marked on the instrument.

Retain these instructions in a safe and known place for future use.

The XD One is rated via the Class 1 'Laser Safety Guideline' under all conditions of normal use.

Class 1 laser products may contain laser systems of a higher class but there are adequate

engineering control measures to ensure that access to the beam is not permitted during normal

use.

WARNING –

Class 3B laser radiation: do not open the laser

housing when the laser is powered on as it may result in eye

damage from directly viewing the laser beam.

The XD One complies with:

•

IEC 60825-1 2014

•

21 CFR-1040.10 and 1040.11

XD One_User manual_P5644.1601_Rev B

Table of Contents