Cleaning And Maintenance - Russell Hobbs RHEMN30L Instructions And Warranty

CLEANING AND MAINTENANCE

• Do not open or change any parts by yourself. Please refer to a
qualified electrical service department or return to the supplier if
servicing is necessary.
• Turn off the oven and remove the power plug from the wall socket before
cleaning.
• Keep the inside of the oven clean. When food splatters or spilled liquids
adhere to oven walls, wipe with a damp cloth. Mild detergent may be used
if the oven gets very dirty. NOTE: Avoid the use of spray and other harsh
cleaners as they may stain, streak or dull the door surface.
• The outside surfaces should be cleaned with a damp cloth. To prevent
damage to the operating parts inside the oven, water should not be
allowed to seep into the ventilation openings.
• Wipe the door and window on both sides, the door seals and adjacent
parts frequently with a damp cloth to remove any spills or spatters. Do not
use abrasive cleaner.
• Do not allow the control panel to become wet. Clean with a soft, damp
cloth. When cleaning the control panel, leave oven door open to prevent
oven from accidentally turning on.
• If steam accumulates inside or around the outside of the oven door, wipe
with a soft cloth. This may occur when the microwave oven is operated
under high humidity condition. And it is normal.
• It is occasionally necessary to remove the glass tray for cleaning. Wash
the tray in warm sudsy water or in a dishwasher.
• The roller ring and oven floor should be cleaned regularly to avoid
excessive noise. Simply wipe the bottom surface of the oven with mild
detergent. The roller ring may be washed in mild sudsy water or
dishwasher. When removing the roller ring from cavity floor for cleaning,
be sure to replace in the proper position.
21