LIFTING THE TROWEL
You can use the LIFTING HOOK to move the machine.
MANEUVER OPERATION
Below (Figure 1) illustrates a typical walk-behind trowel application. Practice maneuvering the
trowel. The trick is to let the trowel do the work.
Continue to practice maneuvering the trowel. Try to practice as if you were finishing a slab of
concrete. Practice edging and covering a large area. Remember a good finishing technique is to
work backwards. Be careful when moving backwards so that hazards can be avoided. The best
way to get accustomed to the trowel is repeated use.
Figure 1
TROWELLING MACHINES BLADE ADJUSTMENT
Edging Power Trowel have a blade level adjustment incorporated into the outside bolt hole in the
blade arm. This adjustment is a threaded insert in the blade arm, the blade bolt goes through the
middle of the insert. (Figure 2)
5