Masalta MRT364 Operation Manual

Ride-on power trowel

Advertisement

Quick Links

OPERATION MANUAL
RIDE-ON POWER TROWEL
MRT364
To reduce the risk of injury, all operators and maintenance personnel must read and understand these
instructions before operating, changing accessories, or performing maintenance on Masalta power
equipment. All possible situations cannot be covered in these instructions. Care must be exercised
by everyone using, Maintaining or working near this equipment.
!
WARNING
R

Advertisement

Table of Contents
loading

Summary of Contents for Masalta MRT364

  • Page 1 To reduce the risk of injury, all operators and maintenance personnel must read and understand these instructions before operating, changing accessories, or performing maintenance on Masalta power equipment. All possible situations cannot be covered in these instructions. Care must be exercised...
  • Page 2: Table Of Contents

    Table of Contents 1. SAFETY INFORMATION. ………………………………………………………………….. 2 1.1 Operating Safety…………………………………………………………………..………..2 1.2 Operator Safety while using Internal Combustion Engines…………………..………..2 1.3 Label Locations……………………………………………………………..………………3 1.4 Safety and Operating Labels……………………………….……………..…………….4-5 2. OPERATION …………………………………………………………….……………………... 6 2.1 Control……………………………………………………………………………………………..6 2.2 Operating Principle ………………………………………………………………………………6 2.3 Delivery Checks ……………………………………………………………………….…………7 2.4 Before Starting……………………………………………………..………………….………….7 2.5 To Start ……………………………………………………………………………………………7 2.6 To Stop ……………………………………………………………….…………………………..
  • Page 3: Safety Information

    SAFETY INFORMATON 1.1 Operating Safety  NEVER operate this machine in application for which it is not intended.  NEVER allow anyone to operate this equipment without proper training. People operating this equipment must be familiar with the risks and hazards associated with it. ...
  • Page 4: Label Locations

    SAFETY INFORMATION 1.3 Label Locations...
  • Page 5: Safety And Operating Labels

    SAFETY INFORMATION 1.4 Safety and Operating Labels Masalta machines use international pictorial labels where needed. These labels are described below: Label Meaning DANGER! Engines emit carbon monoxide; operate only in well-ventilate area. Read the Operation Manual for machine information. No sparks, flames, or burning objects near the machine.
  • Page 6 SAFETY INFORMATION Label Meaning WARNING! Hand injury if caught in moving belt. Always replace belt guard. CAUTION! Tie-down point. Key switch, engine start: Start WARNING! Hot surface! WARNING! Read and understand the supplied Operation Manual before operating the machine. Failure to do so increase the risk of injury to yourself or others.
  • Page 7: Operation

    OPERATION 2.1 Controls Ref. Description Ref. Description Right Pitch Control Work Light (one each side) Left Pitch Control Right Foot Pedal (Safety Stop Switch) Water Tank Left Foot Pedal (Throttle Control) Fuel Tank Work Light Switch Right Control Arm Engine Keyswitch Left Control Arm Water Spray Control Operator’s Seat...
  • Page 8: Delivery Checks

    OPERATION 2.3 Delivery Checks Immediately on taking delivery of your new equipment and before putting it into service.  Read the operation manual completely—it could save a great deal of unnecessary expense.  Read the engine manual supplied.  Check the general condition of the equipment –has it been damaged during delivery? ...
  • Page 9: Operation

    OPERATION 2.7 Operation To utilize your Ride-On Trowel to its fullest capacity, the machine should be driven in the direction that the operator is facing. This will finish the widest possible area, while giving the operator and excellent view of the slab surface about to be troweled. When the machine reaches the end of the slab, make a 180°U-turn, and repeat the straight line of direction to the other end of the slab.
  • Page 10: Maitenance

    MAINTENANCE 3 MAINTENANCE 3.1 Periodic Maintenance Schedule The chart below lists basic trowel and engine maintenance. Refer to engine manufacturer’s Operation Manual for additional information on engine maintenance. A copy of the engine Operation Manual was supplied with the machine when it was shipped. To service the engine, tilt the seat forward.
  • Page 11: Lubrication

    MAINTENANCE 3.3 Lubrication 1. Engine oil The long life and successful operation of any piece of machinery is dependent on frequent and thorough lubrication Before using the trowel, always check your engine for oil. Use proper engine oil as recommended in the engine manufacturer’s manual.
  • Page 12: Air Filter

    MAINTENANCE 3.6 Air Cleaner Maintaining a clean engine will extend engine life. Keep air filter clean at all times. Clean air filter using the recommended solvent daily. See engine manual for proper cleaning procedure. Let the filter dry before reinstalling. NEVER use gasoline or other types of low flash point solvents for cleaning the air cleaner.
  • Page 13: Technical Data

    TECHNICAL DATA 4. TECHNICAL DATA Engine type Honda GX690 Power kw(hp) 18 (24) Operating weight kg(lb) 320 (705) Blade speed Blade pitch (range) degree 0-30 Gearbox type Heavy duty Gearbox lubrication type MOBIL 600XP320 L(oz.) 0.78 (26) each Working dia. mm (in) 1890 (74) Overlapping...
  • Page 14: Warranty

    WARRANTY MASALTA products are covered by warranty for a period of six (6) months from the date of purchase against defects in material or workmanship provided that:  The product concerned has been operated and maintained in accordance with the operating instructions.
  • Page 15: Maintenance Record

    MAINTENANCE RECORD PREVENTATIVE MAINTENANCE AND ROUTINE SERVICE PLAN This Ride-on Power Trowel has been assembled with care and will provide years of service. Preventative maintenance and routine service are essential to the long life of your Ride-on Power Trowel. After reading through this manual thoroughly, you will find that you can do some of the regular maintenance yourself.
  • Page 16: Ec Declaration

    CE-KONFORMITÄTSERKLÄUNG DECLARACIÓN DE CONFORMIDAD DE LA CE DÉCLARATION DE CONFORMITÉ C.E. MASALTA ENGINEERING CO., LTD Weisi Road, Baohe Industrial Estate, HeFei 230051, China hereby certifies that the construction equipment specified hereunder / bescheinigt, da. das Bauger.t / certifica que la máquina de construcción / atteste que le matériel : Category / Art / Categoría / Catégorie:...
  • Page 17 Distributed By MASALTA ENGINEERING CO., LTD Add: 20 Dalian Road, Baohe Industrial Estate, Hefei 230051, China Tel: 86-551-64846601 Fax: 86-551-64846616 E-mail: sales@masalta.com.cn, masalta@mail.hf.ah.cn Http://www.masalta.com.cn Version: 01/15/01...

Table of Contents