Page 1
To reduce the risk of injury, all operators and maintenance personnel must read and understand these instructions before operating, changing accessories, or performing maintenance on Masalta power equipment. All possible situations cannot be covered in these instructions. Care must be exercised...
一、Safety Precautions 1.1 Machine Information & operation Instruction This machine is a walk-behind concrete surface treatment equipment, widely used in concrete surface treatment of high standard road、warehouse and plaza. structure including: A. Rotary lever and operating handle assembly; B. Electric motor; C. Gear box; D.
• Use this machine trowel surface like mud which are not suitable for machine. The machine is designed and manufactured accordance with safety standards strictly, Minimize security risks and improve operator safety, However, there may still be some security risks. Example •...
• Familiar with all safety devices The people following are prohibited to operate machine: • Children • Drunk or taking narcotic drug users Wear protective tool when operating the machine • Wear protective clothing • Wear hearing protection (earplugs, earmuffs, etc.) •...
1.4 Electric Motor operating safety regulations Open-air operation 1、 Do not start the motor work in rainy day. 2、 The wires and connectors must be checked for damage before starting motor. 3、 Turn off the power and find out the malfunction if there is abnormal sound or blade pan can not rotate after motor starting.
1.5.7 Keep the machine clean, clear label, replace missing or ambiguous label, especially the warning labels 1.5.8 Be careful blade, otherwise sharp blade may cause serious injury Please use Masalta part when replace or all the part with same parameters. 1.6 Safety Label 1.6.1 The position of safety label 1.6.2 Meaning of Safety label...
二、Operation Information 2.1 New Machine Assembly For the convenience of packaging and transportation, handles and racks are packed separately before leave factory, and need to assemble new machine before operation. 2.1.1 Machine assembly Assemble handle and rack, tighten the bolts, adjust the rope and the handle angle, connect current cable (self-prepared).
Graph 2: Blade pitch Graph 2 Serial Working Conditions of Suggested Concrete Working Pitch Very wet surface working stage 0° Wet surface working stage 5° Little water surface working stage 15° Semi dry surface working stage 20° 2.3 Inspection before operation ■...
2.5 Operating machine 2.5.1 Adjust handle to suitable operation height Attention: Don’t adjust handle height while operating 2.5.2 Holding the operating handle, Speed adjustment lever to achieve the appropriate rotating speed. the motor output belt transmission drive the rotating of blade pan after decelerated by reducer(Reduction ratio fixed), Speed control function can be achieved through the effective control of the diameter of the drive pulley of the motor output.
Other faults, please consult sales service staff. 3.3 Wearing parts list Quantity each Serial no. description remarks machine Belt Blade 4、Technical Data 4.1 CBU(Complete Build Unit ) technical data Description Data Model DMD36 Diameter 36″(910mm) Rotating speed 80-100rpm (Multi-speed) Blade angle 0-20°...
WARRANTY WARRANTY These products are covered by warranty for a period of six (6) months from the date of purchase against defects in material or workmanship provided that: · The product concerned has been operated and maintained in accordance with the operating instructions. ·...