Numerical Indication - Ecom DP Operation Manual

Press <ON> to switch on the ecom-DP.
The instrument displays the following:
Clock set
Delete RAM
Press OK to continue!
- Press twice the <OK> key and the measurement value
menu will be displayed.
- Press <F2> (wrench symbol) to call up the menu „In-
strument settings".
- With the cursor keys <UP/DOWN> scroll until the menu
point "Set clock".
- Press <OK> to activate.
Date and time can be set as follows:
1. Select with the cursor keys <RIGHT/LEFT> the posi-
tion to be changed (corresponding field blinks).
2. Adjust the correct numbers with the cursor keys
<UP/DOWN>.
3. Press <OK> to confirm correct date and time settings.

3. Numerical indication

If „Pressure Auto -> O by start" is set on
„YES" (Chapter 6.2), so the internal pres-
sure sensors should be flown with pres-
sure first after the switch-on of the instru-
ment, as they are zeroed during
After switch-on, the specifications of the pressure sensor
will be displayed: denomination, measurement range and
connection seizure (+/-). Press <OK> to access to the
measurement value menu.
1. Before making measurements, the instrument must have
adapted the ambient temperature!
2. Make sure, that the ambient temperature remains constant
during measurement!
said switch-on procedure.
5