Caution - Project Source MT-25005L Installation Instructions Manual

Bidet toilet
Table of Contents

Advertisement

Available languages

Available languages

WARNING
• The power cord, if damaged, must be replaced by professionals from the manufacturer's
service department or similar departments.
• Please make sure the distribution box power supply is turned off during service or inspection.
Otherwise, electric shock or damage to parts may occur. *Exclude when "Spray Tip
Cleaning" function is activated.
• Persons disabled or lack of experience (including children) are required to use this product
under supervision. Otherwise, personal burns, electric shock, fire, or injury may occur.
• Please do NOT allow children to play with this product. Otherwise, personal burns, electric
shock, fire, or injury may occur.
• Please do NOT throw light cigarettes or other inflames into the bowl. Doing so may result
in a fire.

CAUTION

• Please do NOT use toilet if it is loose. Otherwise, the toilet may come off or fall, and cause
personal injury.
• Never touch a damaged area, or injuries may occur. Please replace a damaged part as soon
as possible.
• Please do NOT shock the product, put heavy objects on it, or let any person stand on it.
Otherwise, product could become damaged, and personal injury or water leakage may occur.
• Do NOT lift up this product by grabbing the seat or lid.
• Do NOT lift on the seat or lid when there is any object on the toilet. Otherwise, damage may
occur which may lead to injuries.
• When cleaning the plastic parts (such as the toilet seat and lid) and water inlet hoses, please
use kitchen detergents (neutral) and never use bathroom detergents, household detergents,
gasoline, banana oil, cleaning powder, nylon brushes, etc. Otherwise, the plastic parts may
become damaged or cracked, and cause personal injury, and water inlet hoses may become
damaged and cause water leakage.
• To avoid sudden water leakage, please do NOT remove the water inlet strainer with the angle
valve opened. (Please refer to the water inlet strainer cleaning procedures).
• Please do NOT bend or damage water inlet hoses or water leakage may occur.
• Please use the new hose assembly supplied with the tools. Old hose assembly can NOT be
reused, or water leakage may occur.
• Please do NOT pour hot water into the bowl, or the bowl may break and cause injuries or
indoor water leakage.
• Please do NOT flush anything other than feces, urine, or an excessive amount of tissue or
the bowl may break and cause injuries or indoor water leakage.
• Please do NOT lean on the lid when using the toilet, or the lid may be damaged.
• In the event of water leakage, please make sure to close the water inlet angle valve.
• When the ambient temperature is below, 32°F, please take freeze protection measures to
prevent damage to pipes or hoses.
• When the hose is frozen, the toilet or pipes may become damaged and cause water leakage.
• Please adjust indoor temperature properly to avoid damages to the toilet or hoses due to
freezing under cold conditions.
• Please drain water from the toilet inlet hose and turn off the distribution box power supply if
unit will be out of service for an extended period of time.
• After installation, please flush toilet several times to clean out any old or stagnant water from
the lines. Otherwise, skin irritation may occur.
• Heat or fire may result if the toilet is always powered on.
MANDATORY ACTIONS
FORBIDDEN ACTIONS
7

Advertisement

Chapters

Table of Contents
loading

Related Products for Project Source MT-25005L

This manual is also suitable for:

Mt-25005a38544471054593

Table of Contents