Project Source MT-25005L Installation Instructions Manual page 16

REMOTE CONTROL - BASIC FUNCTIONS
17. Flush/Auto Flush
• Press this button once to Flush. The corresponding indicator will blink on the remote control.
Press and hold for 3 seconds to start Auto Flush. After leaving the seat for 5 seconds, Auto Flush will
flush the toilet once. Press and hold this button again to cancel Auto Flush.
Attention: When a person is sitting on the seat and flushes the toilet with the remote control or the
side button, after leaving the seat Auto Flush will not work.
18. Night Light
• Press this button to turn on the light, press again to turn the light off. The corresponding light on the
right will be on or off simultaneously.
19. Power save/Off
• When power is on, press and hold this button for over 3 seconds to power off the toilet and turn off
the icon indicator.
SIDE BUTTONS - BASIC FUNCTIONS
• This product is designed to be operated primarily by the remote. The buttons on the side are used
only when necessary.
Flush
When power is on, press this button to Flush once. Power off: When power is on, press and
hold this button for over 3 seconds to power off the toilet and turn off the icon indicator. Power
on: When power is off, press and hold this button for over 3 seconds to power on the toilet
and turn on the icon indicator. Outage flush: In case of power outage, press this button to
flush once. (Note: Back-up batteries must be installed.)
Dryer
Press once to start Drying, then press again to stop.
Front Wash
Press once to start Front Wash, then press again to stop.
Rear Wash
Press once to start Rear Wash, then press again to stop.
Power save/Off
Flush/Power Dryer
ON/Off
19 18
Night light
Front Rear
Wash Wash
16
17
Flush/Auto flush
Fan
Fan
B