Specifications - Project Source MT-25005L Installation Instructions Manual

SPECIFICATIONS

Rated Voltage
Maximum Power
Rated Power
Power Cord Length
Water pressure range
Water pressure control
Water temperature control
Water heating power
Flushing
Safety device
Rear wash
Front wash
Seat heating power consumption
Seat
Temperature Seat temperature control
Seat fuse
Drying power consumption
Drying
Drying temperature
Safety device
Fan power consumption
Fan
Fan/Deodorant
Remote Control
Product Dimension
Product Weight
Average Water Consumption
AC 120V, 50-60Hz
1280W (at inlet water temperature 41°F, and outlet water
temperature and flow set at the top level)
1200W(at inlet water temperature 59°F±32.9°F)
4-ft 11.05-in
0.1 MPa (dynamic)-0.75MPa (static) (flow no less than 18L/min)
4-level adjustment
4-level adjustment: ambient temperature, 91.4°F, 96.8°F, 102.2°F
1600W
Temperature sensing and control system, burn-out prevention
device, over-temperature protection device, and water and
electricity separation system.
0.4-0.7L/min(water pressure≥0.15MPa)
0.4-0.7L/min(water pressure≥0.15MPa)
40W
4 level adjustment: ambient temperature, 91.4°F, 96.8°F, 102.2°F
Temperature sensing and control system/fuse
200W
4-level adjustment: 95°F, 107.6°F, 118.4°F, 129.2°F (Air
temperature depends greatly on ambient temperature,
so values here are only for reference)
Recoverable temperature switch/fuse
3W
Catalyst deodorizing box
Yes
LWH: 26.77×16.54×20.31(in)
88LB
4.0L
21
Printed in China