Project Source MT-25005L Installation Instructions Manual page 15

Bidet toilet
Table of Contents

Advertisement

Available languages

Available languages

REMOTE CONTROL - BASIC FUNCTIONS
13. Water Temp
• Press this button to enter water temp adjustment. There are 4 settings to choose from:
Normal temp, Level 1, Level 2, Level 3.
Normal temp: No heat.
Level 1: 91.4°F with 1 light on.
Level 2: 96.8°F with 3 lights on.
Level 3: 102.2°F with 5 lights on.
Each time you press this button, it will move to the next level.
14. Child Wash
• Press this button to start the Child Wash mode. The nozzle extends out, and the nozzle position is at
the front (Level 5). The water pressure is low (Level 1), and the water temp is at a mid-grade 96.8°F.
After washing, press this button again to end the session, or it will automatically end after 30
seconds of use.
15. One Solution
• Press this button to start One Solution mode. Session will consist of a Rear Wash for 40 seconds,
Oscillate Wash for 20 seconds, and Warm Air Dryer for 20 seconds. Press this button again to end
the session.
16. Seat Temp
• Press this button to enter Seat Temp adjustment. There are 4 settings to choose from:
Normal temp Level 1, Level 2, Level 3.
Normal temp: No heat.
Level 1: 91.4°F with 1 light on.
Level 2: 96.8°F with 3 lights on.
Level 3: 102.2°F with 5 lights on.
Each time you press this button, it will move to the next level. To prevent the low temp burning, the
toilet seat will automatically lower to below 95°F after a person sits on the seat for 10 minutes.
NOTE:
• The numbers below the remote-control indicator is referenced only for functional instructions and the actual remote
does not have this number.
• Once the seat is powered back on, all parameters automatically return to the settings before the power was off.
• The toilet can be put into Idle Mode, by depressing the Close/Power button for 3 seconds or longer until the remotes
lights turn on.
14
15
15
NOTE:
• Idle mode means that the Rear Wash,
Front Wash, Dryer, Flush, etc. will not be
actively working. Child Wash, One Solution,
Strong Wash, and Lady Care must be
enabled in idle mode.
13
Fan
16
Fan
B

Advertisement

Chapters

Table of Contents
loading

Related Products for Project Source MT-25005L

This manual is also suitable for:

Mt-25005a38544471054593

Table of Contents