Adjusting Brewed Products - Saeco Royal OTC Operation And Maintenance Manual

Ensure the machine is ready for use before dispensing
hot water. Place a container under the hot water
dispensing spout.
Press the "Hot Water" button. After a few moments
hot water will be dispensed from the hot water
dispensing spout.
The display will show:
Product brewing stops automatically when the preset
level is reached. The user can stop product dispensing
once the desired quantity is reached by pressing the
"Hot Water" button again.
9.10

Adjusting Brewed Products

The machine allows you to adjust the product length
according to your needs and to the type of cup used.
Adjusting the product length can be performed by the
service provider via keypad in visual mode. The
product quantity is adjusted while being brewed. Only
for the "American coffee" and given its particular
dispensing cycle, you can adjust the dose and water
percentage in parametric form.
Switch to machine programming mode as described in
section "Access to the Technical Menu".
Tech Menu
Settings
Statistics
Exit
Select the "SETTINGS" option and press the "OK"
button.
Settings
Credits Menu
BEVERAGE SETTINGS
Machine Menu
Press the "DOWN" button to select the "BEVERAGE
SETTINGS" option.
Settings
Credits Menu
BEVERAGE SETTINGS
Machine Menu
Press the "OK" button to enter.
BEVERAGE SETTINGS
Espresso
Coffee
HOT WATER
Select the beverage that you wish to program and stop
the brewing process when desired, as shown on the
display. Set an espresso coffee as an example.
English
53