Saeco Royal OTC Operation And Maintenance Manual page 41

MENU ITEM
TECH. PW
Exit
Display Menu
Language
Contrast
Display Logo
Standard
Bean
Custom
Exit
Water Menu
Hardness
FILTER (0/8)
Exit
DESCALING
FACTORY SETUP
Description
This function allows you to set or disable the password to access the Tech. menu.
NOTE:
Enter the value '0000' as password to disable the password.
If you forget the PASSWORD, you must start a reset procedure. Please contact Saeco
(Evoca group) customer service.
Warning:
The technical menu password also allows you to access the user menu
This option allows the user to go back to the menu top level
This menu allows you to set the language for the texts displayed on the screens and the
display contrast ratio.
This setting allows you to select one of the following 17 user interface languages:
- ITALIAN
- ENGLISH
- GERMAN
- FRENCH
- SPANISH
- PORTUGUESE
- POLISH
- RUSSIAN
- SLOVENIAN
- DUTCH
- SWEDISH
- HUNGARIAN
- CZECH
- SLOVENSKÝ
- ROMANIAN
- GREEK
- BULGARIAN
The language currently in use is inside a dotted rectangular box.
To set the correct display contrast according to room illumination.
This function allows you to change the image (logo) displayed on the "ready for use" screen
and during machine start-up.
The currently active setting is inside a dotted rectangular box.
The standard logo is displayed, i.e. "ROYAL".
A coffee bean is display as logo.
This function allows you to set a customised logo by means of the Windows app provided
to our customers.
This option allows the user to go back to the menu top level
This menu allows you to specify the water hardness used on the machine and control filter
activation.
To change the machine water hardness setting.
With the "Hardness" function you can adjust your machine to the level of hardness of the
water you use, so that the machine will request descaling at the right time.
Measure water hardness as shown in section "Measuring and Adjusting Water Hardness".
It allows you to check the water filter activation status and, possibly, to activate a new one.
This option allows the user to go back to the menu top level
This function starts the descaling cycle as described in the relevant section.
This function allows you to return all machine configurations and products' doses to the
factory-set values.
NOTE:
the use of this function does not alter the following:
- Credits
- Password
- Filter status
- Counters and statistics on use
English
41