Table of Contents
Advertisement
English
STANDARD
CLEAN
The bar shows the washing progress.
Wait until the cycle stops automatically. When the
cycle has been completed, the display shows:
FILL WATER TANK
Water
OK
Rinse the water tank and fill it with fresh drinking
water. Press the "OK" button to confirm.
INSERT TUBE
WITH 1/2 L WATER
Cappuccinatore
OK
Wash the container used for the solution thoroughly
and fill it with 1/2 (half) litre of fresh drinking water
which will be used for rinsing.
Empty the container placed under the dispensing spout.
Insert the suction hose into the container used. Press
the "OK" button to confirm.
PLACE A CONTAINER
SOTTO IL
Cappuccinatore
OK
Place an empty container under the dispensing spout
and press the "OK" button to confirm.
STANDARD
CLEAN
The machine performs a Cappuccinatore rinse cycle.
The bar shows the rinsing progress.
Wait until the cycle stops automatically. The machine
will go back to the normal operating cycle.
64
It is advisable to remove
the Cappuccinatore from
the machine when not
being used, in order to
keep it clean.
Here is an explanation of
how to disassemble and
wash the Cappuccinatore
with left-hand fitting. If the
right-hand
installed, you can carry out
the
same
except that you will need
to remove the suction
tube and insert it on the
opposite
shown here.
Remove the suction tube from the Cappuccinatore.
fitting
operations
side
to
that
is
Hide quick links:
Advertisement
Table of Contents
