FIRMWARE UPDATE PROCEDURE
2. Updating by USB
The latest firmware can be downloaded to a USB memory for updates.
2.1. Connecting to the USB Memory
(1) Preparation
•
USB format : Prepare a USB memory formatted in FAT16 or FAT32.
•
USB flash drive (memory), use the USB2.0.
•
Do not run the USB memory through a hub.
•
Do not connect a computer to the USB port of this unit using a USB cable.
•
Do not use an extension cable when connecting the USB unit.
2.2. Unzip Download File
Unzip the downloaded file on your computer.
DNP-XXXXXXX
USB_DNP-XXXXXXX_XXXXXXXXXXXX-XXXX.zip
You can find "firmwares" folder after unzipped.
Copy that folder to USB flash drive.
You have to put "firmwares" folder on root directly on USB flash drive(memory).
copy to USB flash drive
USB memory supports only USB2.0.
25