[Precautions for Disassembly]
When disassembling, connect the F102 and GND with an ground lead, and discharge for approximately 10 seconds before
starting the disassembly.
GND
F102
Ground wire
1.
FRONT PANEL ASSY
Proceeding :
TOP COVER →
FRONT PANEL ASSY
(1) Remove the screws.
View from the bottom.
(2) Remove the connector wires and the FFC. Remove the screws.
FFC
CP200
See "EXPLODED VIEW" for the disassembly method of each P.C.B included in FRONT PANEL ASSY.
13