Initialization For The Factory Mode; Owner's Manual Described Initialization Mode (User Reset) - Denon DNP-730AE Service Manual

1. Initialization for the factory mode

Backup data initialization is carried out. See Initialization Items.
After initialization, move on to nomal mode.
CAUTION
Version information (such as rewriting failed log) Clear.
Clear the history of protection.
Operation
While holding down buttons "SOURCE" and "CURSOR d " simultaneously, insert the AC plug into the wall outlet to turn
on the power. d
Startup display
All lights display (2 seconds) - All off display (2 seconds)
Lighting of all LEDs on the unit (4 second)
"Factory Reset" displayed for 5 seconds.
Initialization Items (Default setting)
Source
DIMMER
Sleep
REPEAT/RANDOM
Favorite list
iPod mode
Setup Menu/Network
Protection history
Version up information

2. Owner's Manual described initialization mode (User Reset)

Backup data initialization is carried out. Refer to Initialization Items.
After initialization, move on to nomal mode.
CAUTION
The differences between this operation and restoring the factory default are as follows.
• Does not clear the version information such as rewriting failed log.
• Does not clear the history of protection.
• Network devices are started and initialized d
Operation
In "STANDBY" status, press and hold the "SOURCE" and "CURSOR
turn on the power.
Startup display
"Initialized" displayed for 5 seconds.
Wait for more than 90 seconds after "Initialized" is displayed and then turn the power off. d
(During this time, start and initialize the network devices.)
Setting
Internet Radio
100%
OFF
OFF
Clear all
Remote Mode
Set to Initial value, all
NO PROTECT
Clear all
17
" buttons along with the power operation button to
f