Instructions Guide
EN
Basic Operation
Power ON/OFF: Use the button on remote control (Rem.1) or the Power button which
can be found on the back of the primary speaker (Ref.4) to switch the unit on/off.
Change D80's speaker modes in between: Bluetooth, USB, Line in (RCA), Optical or
HDMI/ARC using the corresponding mode buttons on remote control: BT, OPT, ARC,
USB or LINE. Alternatively, use the Input button which can be found on the back of the
primary speaker (Ref.2).
The mode selected is indicated by the sensor LED light colour positioned on the front
of the main speaker, such as:
Bluetooth - Blue
•
Optical - White
•
Line In/RCA - Light Blue
•
HDMI Arc - Green
•
USB - Purple
•
Volume, treble and bass can be changed/controlled as per your preferences in all
modes. Alternatively, use the pre-defined equalisers (Movie, Music & Dialogue) by
pressing the corresponding buttons on remote control, or use the 'EQ' button (Ref.6)
on the back of the main speaker.
8