Opera Static Installation Manual page 22

Using a damaged bed may result in injury.
For optimal safety, your bed should be plugged into a surge
protector (not supplied).
Danger of explosion if batteries are not replaced correctly. Replace
only with 6L461 9V batteries and LR03 AAA batteries. Using the wrong
batteries may result in explosion, damage to the bed and injury.
When replacing batteries follow the correct way of replacing them,
this is printed on the battery compartments. Reversed batteries may
result in damaging the product.
Do not use different types of batteries when replacing the batteries
(e.g. Alkaline, rechargeable and carbon-zinc, old batteries) this may
result in damaging the product.
If the bed is not going to be used for a long period of time, remove
the batteries to prevent damage or injury from possible battery
leakage.
Do not recharge the battery or batteries that are not intended to
be recharged, this may result in the battery rupturing, damaging
the bed and causing injury. Always follow the battery manufacturers
guidance on how to safely use batteries.
Do not disassemble, crush, puncture or otherwise damage the
batteries. This can result in leakage or rupture.
Always dispose of used batteries appropriately, contact your local
council or local waste recycling facility for further information on safe
disposal and recycling.
Do not open or tamper with the control box, motors or hand controls
(with the exception of replacing batteries). The bed is designed so
that little maintenance is required. If the control box or motors are
opened this may void the warranty terms and conditions.
Do not alter components, wiring or modify the bed, this may result
in damage to the products and injury to persons. This will void the
warranty terms and conditions.
The bed is only designed to be used in the domestic environment, at
home. The bed is not designed nor intended to be used in a hospital
setting. Using this bed in hospital or a care home may result in injury
to users.
22 | Opera Smart Adjustable Bed Installation Guide and Technical Specification | Version 2