Opera Static Installation Manual page 18

3.3 Program Functions
3.4 Reprogramming Functions for Sync
When syncing two bases together, the ANTI-SNORE, ZERO GRAVITY and
MEMORY functions may need to be reprogrammed to ensure both bases are
fully synchronised. This is how each function is reprogrammed:
Anti-Snore
After connecting the sync cable into both bases, press the FLAT button on the
handset. Press the HEAD UP button until the 2 bases are at an 8 degree angle.
Push and hold the ANTI-SNORE button until the handset back lights blink.
Zero Gravity
Press the FLAT button on the handset. Press the HEAD UP button until the 2
bases reach the 17 de gree angle. Next, push FOOT UP button until the foot
section of both bases reach the 25 degree angle. Next, press and hold the
ZERO GRAVITY button until the handset back lights blink .
Memory
Press the FLAT button on the handset. Using the HEAD UP and FOOT UP,
adjust the base to a com fortable position. Next, press and hold MEMORY
button until the handset back lights blink.
18 | Opera Smart Adjustable Bed Installation Guide and Technical Specification | Version 2
Lock
Locks and unlocks handset control. Press and hold lock
button until lock button flashes red. To unlock, press
and hold for 5 seconds.
Memory
Adjust head and/or foot section(s) to desired positions.
Press and hold MEMORY button until the back-light
on handset flashes. Release button and wait for flash
to stop. Button has now been programmed. Repeat
process if new preset position is desired.