Opera Static Installation Manual page 10

11 | Add batteries to
handset
Insert the two AAA
batteries (OP058) into the
handset (OP052). Check
the handset is powered by
pressing any button and
watch out for the button
back lighting illuminating.
12 | Connect the bed to mains power
Plug in the smart base to a mains power outlet and switch on.
13 | Pair the handset
When you switch on the
mains power to the base,
a light on the control box
underneath the base will
illuminate and flash blue.
This indicates the bed is in
pairing mode.
Hold the PAIR button down
on the handset for 5-10
seconds until the control
box light underneath the
base changes to green.
If your smart base does not pair first time or becomes
disconnected, there is a PAIR button on the control box. Press this
to reactivate pairing mode and the control box light will illuminate
blue to indicate the base is ready to pair.
10 | Opera Smart Adjustable Bed Installation Guide and Technical Specification | Version 2