Using Clean Mode; Unmounting Media; Using The Keyboard - Mitel UC360 User Manual

Using Clean Mode

Use Clean Mode to clean the UC360 touch screen.
1. Press
2. Press Settings
3. Tap Clean Mode.
The touch screen is disabled.
4. When the screen is clean, hold

Unmounting Media

If you use a USB flash drive or SD card, unmount it before removing it.
1. Press Settings
2. Select Unmount Media.
3. Select SD Card or USB Flash Drive.
4. Remove the SD card or USB Flash Drive.
Note: If you remove a device without properly unmounting it first, you will see an icon (yellow
triangle with an exclamation mark) in the status bar in the upper right corner.

Using the Keyboard

It is recommended that you attach a physical keyboard and mouse to the UC360. The UC360
supports only one physical keyboard and mouse. The on-screen keyboard is disabled in most
cases if you have a USB keyboard and mouse attached.
It is best to connect the external keyboard while the UC360 is powered off. Then power on the
UC360. Alternatively, you can reboot the UC360 after the keyboard has been connected.
If a you select French (France) as the language, the AZERTY keyboard is the only supported
external keyboard. If French language and an external QWERTY keyboard are desired, you
MUST switch language to French (Canada), or it won't be supported.
If you have not attached a keyboard, the on-screen keyboard appears automatically anytime
you need to type. Use the keyboard to enter text, such as contact names and IP addresses.
See "External Keyboard - Supported Keys" on page 73 for information on the keys supported.
to display the Menu bar.
.
.
for 3 seconds to exit Clean Mode.
About the UC360
21