Table of Contents
Advertisement
CONTENTS OF PACKAGE
A. Lathe Bed Assembly - including;
B. Motor Assembly
C. Headstock Assembly
D. Tool Rest Base Assembly
E. Tailstock Assembly
F. Electronic Controls
NOTE: Lathe shown with Outboard Hand Wheel * on the
Headstock and Tailstock Hand Wheel ** installed.
Lathe is shown on the #70-920 Stand (sold separately).
LIST OF LOOSE PARTS
H
G
G. 3-3/8" Faceplate
H. 8" PRO Tool Rest with
4-5/16" (110mm) Post
I. Spur Center
J. Live Center
K. Long Knockout Bar
ADDITIONAL TOOLS REQUIRED FOR ASSEMBLY & ADJUSTMENTS
#2 Phillips Screwdriver
Model 70-1420VSR Wood Lathe is shipped complete in one box.
Unpacking and Clean-up
1. Carefully remove all contents from the shipping carton. Compare the contents with the list of contents to make sure
that all of the items are accounted for, before discarding any packing material. Place parts on a protected surface
for easy identification and assembly. If any parts are missing or broken, please call RIKON Customer Service
(877-884-5167) as soon as possible for replacements. DO NOT turn your machine ON if any of these items are
missing. You may cause injury to yourself or damage to the machine.
2. Report any shipping damage to your local distributor. Take photographs for any possible insurance claims.
3. Clean all rust protected surfaces with ordinary household type grease or spot remover. Do not use flammables; gas-
oline, paint thinner, mineral spirits, etc. These may damage painted surfaces. Clean thoroughly under the headstock,
tailstock and tool rest body. Then coat with a light film of dry lubricant spray, or wax, to enhance passage of the tool
rest and tailstock on/over the bed. Refrain from using any water-based solvents as they will promote metal rusting.
4. Apply a coat of paste wax to any machined surfaces to prevent rust. Wipe all parts thoroughly with a clean dry cloth.
5. Set packing material and shipping carton aside. Do not discard the packing material until the machine has been set up
and is running properly in case a return is necessary.
CONTENTS OF PACKAGE
*
K
I
L
M
J
L. Short Knockout Bar
M. Hex Wrenches (2.5, 3, 4, 5 mm)
N. Wrenches (38 & 46 mm)
O. Tool Holder, Screws & Washers (2)
P. Outboard Hand Wheel
Q. Tailstock Hand Wheel
7
C
D
A
B
N
Adjustable Wrench
E
**
F
O
P
Q
Advertisement
Table of Contents
