Grit Tube Attachment - Drill Master XP User Manual

Oversplit
Too much material
removed.
Split lines are joined
in the center and
Chisel Edge has
been removed.

Grit Tube Attachment

Simply insert the Grit Tube into the Splitting Port of your
Drill Doctor when sharpening. It will catch the grit that is
formed from the sharpening process. Clean the inside of
your Drill Doctor and the Grit Tube on a regular schedule.
The grit tube is designed to accept a standard 1-1/4" shop
vacuum for extended periods of sharpening.
www.drilldoctor.com
Solution
Reinsert the chucked bit into the
Sharpening Port and remove
enough of the tip until the split
tip looks like the correctly split
bit above.
The Grit Tube attach-
ment is designed to keep
any sparks caused by
sharpening safely inside
the machine and away
from you. In addition, the
Grit Tube reduces the
sharpening dust in the
air and on your work-
bench.
19