Oasis I Series Installation & Operation Manual page 20

Oasis i Series Manual
6.2.4 System Time Settings
Hold the CLOCK button for 2 seconds to enter the system time setting interface. Press the CLOCK again to adjust the
time. After the first press, the hour parameter will be flashing which means it can be changed, use the UP & DOWN
arrow accordingly. Press the CLOCK button again to move to adjusting the minute digits using the same process.
Press the CLOCK button again to save and return to the main interface.
Under this menu, if there is no operation for 20 seconds the system will automatically memorise the settings and
return to the main menu. Press the ON/OFF button at any time during changes to exit without saving changes.
6.2.5 Timer Settings
Setting a Timer
6.2.5.1
The controller can be set up as a two-stage timing switch: Timer ON1~OFF1; Timer ON2~OFF2.
Select ON1, OFF1, ON2 or OFF2 on the timer setting interface.
Press the CLOCK button to enter the timer setting interface. Press the UP or DOWN arrows to choose between ON1,
OFF1, ON2 or OFF2. To set the time, follow the same process as changing the system time to adjust values.
Example: On at 9:20
NOTE: You will need to set both an ON & OFF Time if using this function
1 8