Oasis I Series Installation & Operation Manual page 19

6.2 Functions of the Controller
6.2.1 Start-up & Shutdown
Only from the main screen, the unit can be turned on of off. If the half or full-off screen appears, press any key to go
back to the main interface.
When the unit is started using the controller, if the emergency switch was used to shut it down the controller will
display as follows; the operation will be the same as the regular ON/OFF screen.
6.2.2 Switching Modes
To switch modes, from the main menu short press the MENU button to choose from Heating, Cooling or Auto
modes. A symbol will display on the controller according to what mode is active. After 2 seconds without a change,
the setting will be saved.
If the unit is defrosting, the defrosting symbol will display on the main interface. After defrosting is complete, the
unit automatically switches to Heating or Auto mode depending on what was on prior to defrosting. Under
defrosting the mode can be switched however the unit won't apply the mode until defrosting has been completed.
6.2.3 Setting the Target Temperature
From the main menu, press the UP or DOWN keys to adjust the temperature setting as desired. If you press the
ON/OFF button during this, you will be taken back to the main menu with no changes saved. If there is no operation
for 5 seconds or the MODE button is pressed, the adjustments to the temperature will be saved and you will return
to the main menu.
1 1
1 7