PROAIM CINEMA Series Assembly Manual page 2

Airwave V520 Setup
•
Loosen the clamp of the Airwave V520
Vibration Arm to open it.
•
Align the Airwave Arm to the Scaffold pole
with the help of the Quick-lock Scaff
Mechanism and properly tighten the knobs to
secure it.
NOTE: Airwave V520 Arm can be securely
attached to a Dia 38 to 42mm Scaffold Pole or
Speed Rail with a quick-lock Scaff Mechanism.
•
The Airwave V520 Vibration Arm has been
attached to the Scaffold pole, as shown in the
image.
•
Damping adjustment knob: If the arm is too
soft, turn it towards direction of H (Hard). If
the arm is rigid turn it towards the direction
of S (Soft).
NOTE: The valves should always be adjusted
evenly and set identically. Rebound and
compression of the hydraulic valves should be
set in such a way so that any loose swinging or
vibration of the arm is eliminated.
•
Press the push pin button at the head of the
arm and insert the arm head by sliding it.
•
After attaching the arm head, properly
tighten the ratchet knob at the other side of
the head and secure it.
2