PROAIM CINEMA Series Assembly Manual page 3

•
Airwave arm and the arm head have both
been securely attached to the Scaffold pole.
Airwave Vibration Isolator Setup
•
Remove the bolts of the Airwave Isolator with
the help of a 5mm Allen Key.
•
After removing all the bolts of the isolator,
flip it around.
•
Place the Ronin-Plate
Airwave Isolator. Match the threads of the
plate and the isolator, then insert bolts.
•
Then properly tighten all the bolts with the
help of the 5mm Allen Key.
•
Insert bolts to attach the Airwave Isolator to
the Airwave Arm Head by matching the
threads.
(Not Included) on the
3