Muratec MFX-2500 User Manual page 41

I. Send document format conversion
Set the file format for outgoing messages.
Messages are converted into any of the file formats set here when the recipient's
e-mail address is entered directly or when forwarding a received fax with e-mail.
[TIFF-S (T.37 simple mode)]
Messages are converted into TIFF files in compliance with T.37 simple mode.
T.37 is a standard that is related to the Internet fax. If a message is sent in
this simple mode format, it can be received normally by the recipient's Internet
fax machine.
However, every message is sent out after converting its size to A4 and its
resolution to 200 dpi.
[TIFF (Expansion)]
Messages are converted into TIFF files, but are sent out in the original size
and resolution selected while scanning.
An encoding method can be preset from among MH, MR, MMR and JBIG.
[PDF]
Messages are converted into PDF files.
When registering an e-mail address on one-touch dial or speed dial, the file format
can be set individually.
Even when entering the recipient's e-mail address directly or when setting
recipients for deliveries, TIFF-S, TIFF and PDF can be designated individually by
adding /S, /F or /P, respectively, to the end of the e-mail address.
J. TIFF image encoding method
Set the image encoding method of an outgoing message when it is sent in TIFF
(expansion) format.
K. Insert text when sending mail
When sending e-mail from this device, the message is sent as an attached file.
Select whether to insert text in the e-mail message area.
When text is to be inserted, select the language as well.
Japanese text may not be reproduced correctly, depending on the recipient's
conditions.
When a subject and comments are entered in the transmission dialog box when
sending from client PC software, the entries will appear as the e-mail's subject and
text regardless of this setting.
Chapter 2 System configuration
2
31