Muratec MFX-2500 User Manual page 40

Chapter 2 System configuration
Descriptions
A. Name
The name entered here is shown in sender's field (From) when sending e-mail.
Up to 40 characters can be entered.
B. E-mail address
Enter the e-mail address for this device.
E-mail address can be entered with up to 80 characters.
C. Send mail (SMTP) server
The SMTP server is used to send e-mail.
Enter the domain name or IP address of the SMTP server.
Enter the IP address with dot notation system (xxx.xxx.xxx.xxx).
The domain name can be entered with up to 80 characters.
D. SMTP receiving domain name
Set the domain name for SMTP reception from the mail server. SMTP reception is
not possible unless this setting is chosen.
The domain name can be entered with to 80 characters.
Enter "*" to accept reception from all domains.
E. Receive mail (POP3) server
The POP3 server is used to receive e-mail.
Enter the domain name or IP address of the POP3 server.
Enter the IP address with dot notation system (xxx.xxx.xxx.xxx).
The domain name can be entered with up to 80 characters.
Enter an IP address in both the SMTP and POP3 fields, even if the IP address is
exactly the same for both.
F. E-mail account
The E-mail account is used to log on to the POP3 server.
Enter the e-mail account.
Up to 80 characters can be entered.
G. E-mail password
The E-mail password is used to log on to the POP3 server.
Enter the password.
Up to 80 characters can be entered.
H. Check for new mail
Set the time interval to check for new messages at the mail server.
Set the time from 5 seconds up to 99 hours 59 minutes 59 seconds.
The initial setting is 10 minutes.
30